Understanding the Dyno Readout

[CTR_Timmy]

Can someone help?

I had my GT Turbo on a rolling road on Saturday and im confused on how to read the read out. its says im running 143.5BHP at the fly wheel which is good but how do I read the torque as I thought the torque was shown on the reading at the left hand side which means i am running 217 foot pound of torque which I been told is no way correct as no starlet on here is running that especially off CT9 Stock turbo.

I am very new to all of this and I just want to know how to read my chart.

 

[Adam_Glanza]

scan it and post it up as a picture mate we can help you out

you cant really say straight away as it may be layed out differently

 

[goldenvtr]

Scan it in dude.

 

[sx_turbo]

as above mate

 

[CTR_Timmy]

I will get it scanned asap and post it. Cheers guys. All i know is that it feels alot quicker since they tuned it for me

 

[Kelly]

torque might be in nm

 

[goldenvtr]

217 nm is still far too much for a 143bhp car. should be more like 170nm

 

[Nwimie]

the torque reading will be in NM (nutometers) (sp)

 

[CTR_Timmy]

I will post the reading print out for all to see so you can help me!!!

 

[Dave.]

Newton-Meters (NM) and pounds-feet (lbft) are both acceptable measurements for torque

Dave

 

[Mike@TD.co.uk]

217nm = 160lb.ft

 

[HYBRID]

217nm = 160lb.ft

that seems about right for 147bhp

 

[CTR_Timmy]

I would be happy with that just wanted to know how to read the thing lol! Cheers guys will still post the readout. Roughly whats the 0-60 in the Starlets with that BHp

 

[Dave.]

not that far off stock , I'd guess about 6.5 secs (At best)

Dave