Urgent help needed with some electric plugs

H

hga05

Member +
Just put my engine in and am wondering where some of these connections go. Any help would be great as o havent got a clue. Here are the pictures that if i have uploaded them correctly.

<a href="http://photobucket.com" target="_blank"><img src="http://i220.photobucket.com/albums/dd255/hga05/wires2.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i220.photobucket.com/albums/dd255/hga05/wires4.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

<a href="http://photobucket.com" target="_blank"><img src="http://i220.photobucket.com/albums/dd255/hga05/wires3.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

http://i220.photobucket.com/albums/dd255/hga05/wires2.jpg
http://i220.photobucket.com/albums/dd255/hga05/wires4.jpg
http://i220.photobucket.com/albums/dd255/hga05/wires3.jpg
 
H

hga05

Member +
2 wires in the first picture,
The one circled in the 2nd
and the one in the 3rd which is in the same loom as the connections that are arrowed.
 
H

hga05

Member +
no, not as far as i know, dunno if some of these were not connected but im pretty sure the picture with 2 connections were connected to something.
 
M

MrComment

Fresh Recruit
Your first picture looks like the coolant sensor that has something todo with the A/C is disconnected. Maybe Im misinunderstanding what your asking, but doesnt the wire right next to it plug into that sensor? Your other coolant sensors seem to be connected already.
 
M

MrComment

Fresh Recruit
3rd picture looks like it might be a Dumby Plug for a Tachometer test point? I kinda think it might be the same as "-IG" in the Diagnostic Plug as well. I could be way off base on the function of that plug though. Or it might be something to test the ignition with a specialty Toyota tool.
 
weeJohn

weeJohn

Lifer
First one, if its the piece of wire that comes from the sensor, its not needed unless you are keeping the air con. If its the plug from the loom, it looks like the oil pressure sender switch wire. The sender is in behind the clutch slave cylinder so it looks like it wont be long enough.
Second one is for the ambient air temp switch, not needed unless you are keweping the air con.
Third one is not used.
 
H

hga05

Member +
I have got the air-con still in at the moment so where does that plug go to that is behind the aircon rad? Also in the first picture the wire from the loom looks like it slots on a sensor like the oil pressure sensor but thats already connected up. Also not sure where the other short wire that comes form the coolant housing goes. If anyone as anymore ideas or can look at their car would be great. thanks
 
T

Trevor

Member +
Plugs

There are only 2 wire plugs on a Starlet that can be plugged into the wrong sensor.Every other plug will not fit into any socket other than the one it is meant to be in.What wee John is telling you is 100% correct.
 
Jay

Jay

Admin
Firstly, the easy one:

wires4.jpg


That's for your aircon fan and connects as so:

brakepadsanddiscs3521zs5.jpg




wires3.jpg


These ones to the left and right aren't clear in the pic so you need to take a better image. They should be for MAP sensor, Knock sensor or idle control valve but I'll let you come back with clearer photos.

The brake fluid level sensor connects to the one at the bottom of that pic like so:

brakepadsanddiscs3520fu7.jpg




Not too sure if this will help you on the thermostat side but it's how my auto GT is connected:

brakepadsanddiscs3522bw7.jpg
 
H

hga05

Member +
Isnt the plug on the right of my picture for the aircon fan? the other one sits above the aircon rad.
On the other picture i need to know what the plug is that is circled, the ones that are pointed at with arrows are just on the same loom as the circled one to make it easier for someone to find.
And lastly, on in your picture where does the coolant wire go to? I will also try and get some better pictures, thanks.
 
weeJohn

weeJohn

Lifer
Air con is not my thing as I have always took it out, but is there not supposed to be a sensor that sits at the front to measure anbient air temp Jay?
 
Jay

Jay

Admin
weeJohn said:
Air con is not my thing as I have always took it out, but is there not supposed to be a sensor that sits at the front to measure anbient air temp Jay?
Click to expand...


On the earlier models - I've noticed a few that don't have that sensor.
 
H

hga05

Member +
Found where those two coolant clips go, someone said the other one was unsed but cant see anywhere for the air con one to go. Thanks for the help
 
Jay

Jay

Admin
hga05 said:
Found where those two coolant clips go, someone said the other one was unsed but cant see anywhere for the air con one to go. Thanks for the help
Click to expand...

Should plug onto the aircon fan mate, if you still have it.
 
You must log in or register to reply here.
Top