Water pump fuse

[dac69er]

no.

 

[spence]

no.

Damn

Do you or anyone know anyone that had got one for sale or breaking a 4efte engine?

 

[dac69er]

i dont myself, i only have a spare 4efe head.

put a wanted post up and see if someone has what you want.

worst case, you could always repair it. i reckon it could be brazed pretty easily

 

[weeJohn]

Post in the wanted section and have a look in the for sale section.

 

[spence]

Post in the wanted section and have a look in the for sale section.

I had a look in my bits box that I took off my old engine, ad I did take the thermo housing off so I'm happy I don't have to but another haha

 

[spence]

I don't get it now, my Glanza now isn't starting, I changed the water pump yesterday but it just doesn't want to start. I removed the inlet manifold and the fuel rail to get better access to the pump and i put everything back together but for some reason it doesn't seem to want to fire. It seems like it is about to start but the cuts back out.

Can anyone sujest what it could be please?

 

[weeJohn]

Switch the 3 wire sensor from your old thermo housing with the one you fitted. This is the engine temp sensor to the ECU and helps control fueling.

 

[dac69er]

Switch the 3 wire sensor from your old thermo housing with the one you fitted. This is the engine temp sensor to the ECU and helps control fueling.

if that doesnt solve it, do an ecu error code check and see what you come up with. that should helpfully steer you in the right direction

 

[spence]

Switch the 3 wire sensor from your old thermo housing with the one you fitted. This is the engine temp sensor to the ECU and helps control fueling.

Ill try that tomorrow then.

if that doesnt solve it, do an ecu error code check and see what you come up with. that should helpfully steer you in the right direction

How do you do that? Is it easy?

 

[spence]

Doesn't matter guys, i found that plug that controls the fuel, and it was because of that, that didnt start.

Cheers for the advice dude