TurboDave
Member +
I fitted mine yesterday, good quality manifold well happy with it.
Only problem was between the flange and runner 2 there isnt enough space to fit a standard nut, even by putting the manifold onto the stud and then doing that one first and bit by bit it physically wouldnt fit so I dremeled the top 1mm or so off the top of the nut.
Only problem was between the flange and runner 2 there isnt enough space to fit a standard nut, even by putting the manifold onto the stud and then doing that one first and bit by bit it physically wouldnt fit so I dremeled the top 1mm or so off the top of the nut.