What did you do to your cars today

I took out the engine and box stripped the engine down
I had a bad missfire from wettin the leads and kept drivin it on huge mistake broke a conrod and a piston in bits
degreased the engine bay
 

nazzurro19

Member +
took out my dash speakers, stripped and cleaned up the dash took of the black plastic from my gearstick and polished it to got with my knob, de-wipered the rear, cleaned hoovered and tidy the inside of the car and cleaned the outside also removed my japland underseat areial thingy - and today im guna move my headunit so i can have both my din holder slots free for some gauges
 

GI BOY

Member +
took my ct9 turbo off and upgraded to a vf?? .. and cleaned the whole car inside and out just waitin on my power fc now to bring her up to be mapped
 

matt walters

Member +
took coilovers off gave them a quick clean and greased them, put back on and dropped the car down by another 20mm on the front. tyres sit just under the arch now:rockon: im going to attempt a bit of camber today i think, and then probably drop the back 10/15mm more :)
 

Rory

Lifer
Over the past week,
Inlet manifold off, exaust manifold, down pipe etc off, all gauge wiring back through the firewall into cabin, air condensor ripped out from behind the dash, removed the charcoal cannistor, cleaned the engine bay up a tad.
Also been working on the brothers CRX turbo to boot

This week,
Machine the inlet manifold to remove the vac lines i dont need and plug them, fit the inlet, rebuild my dash and re-run the gauge wiring. Run a new battery line to the boot. Phosphate coat my new wish bones.

Thats it for just now
 

George611

Member +
^ that aint a bad idea! machining the inlet mani i might have to look into that ;) them air con vac pipes are a pain in the arse but looks messy with screws in.
 
Have'nt seen it in a month will hopefully be back at the end of the week looken forward to it. Just payed for a new set of rims today though should look well fingers crossed with them.
 

dac69er

Super Moderator
Today I cleaned it, filled it with petrol and took it for it's frst real drive in 3 weeks.

same here. apart from it hasnt moved for just over a month and it already had a full tank in it ;)

still worked perfectly, as normal!
 

nazzurro19

Member +
today i achieved this

d93ed7e3.jpg


relocated headunit lol and a general tidy, clean, hoover sort out all the plastic surrounds etc
 

jon_young

Member +
few little bits just waiting for ht leads to turn up, and need a new thermostat housing then can see if she will start after buyin the rooling shell
 
finally finished putting my engine together and all the bits to it, fitted td04 and made and tacked together my new down pipe and front exit with screamer pipe, moved and remounted mounts for my civic rad :) and cleaned and tidyed the engine bay.

hopefully fit front mount and finish off exhaust tomorrow and finish getting everything on the engine so its ready to start :) cant wait been to long
 
Top