sure they do a 0.8 - 1.2 - 1.4Well lads I'm buildin a forge 4e engine at the min usin scat rods je pistons prob be runin round a bar or so of boost on ct9 hybrid I'm gona use athena metal gasket just wonderin wat thickness to use help would be appreciated thanks
Id go with a 1.2 if i was u lad, cos ur going to get sick of the ct9, and ul want more power
personally i'd get a trd 0.6mm one,i'm running 1.4mm athena hg on my forged lump,combined with the dish in the piston it has made the car laggier..
i have the same pistons as your self..:9x2 I used the TRD gasket with my -10cc wiseco pistons.
any idea on what dish your pistons were turboloon ? and your compression ratio?.
I had to use the TRD gasket and I still have low static compression of 7.5:1
If I would have used the 1.2mm It would have been even lower ! safe as houses tho I guess. pulls like a train on boost too !