where to get rotated td04 bracket

[RichielightweightGT]

as above can you buy them or would ya have to make one? i made one that will do for now but i was told it will flex too much when i raise the boost

 

[Breno58]

Bring the one you made to a fabricator and get him to make a copy from a thicker steel so it wont flex

 

[RichielightweightGT]

thanks for the reply i didnt think of that atal lol am ill just throw up a pic of my bracket on the turbo to give you an idea of what its like its fairly thick as its 4mm atm how thick would i need?

[/URL][/IMG]

 

[dac69er]

holy crap!!!!!!!

i use a combination of the original bracket and some extra metal. i kept the 2 original mounting points to give it some strength and stop it rotating or moving and then bought it round so it was in the correct position.

 

[RichielightweightGT]

cheers for the holy crap comment, its hard to explain but the actuator wasnt bolted to the turbo before i rotated it, im not sure if i have a picture of it the way i got it but it had two awkward brackets on it and that was before rotation. anyway for the moment it is holding .6 atm and theres still plenty adjustment left in the actuator. does wee john not make proper brackets for these?

 

[Breno58]

If the bracket you have now is 4mm maybe go 8mm, is that actuator actually for a TD04 or a CT9?

 

[RichielightweightGT]

as far as i know its a td04 one, looks too big to b a ct9 one and its not hks but its adjustable, cheers ill get that done if i cant buy a bracket wont be for a while yet as im broke spend 800ish on d car in d last few weeks

 

[bongskag]

you can get it into different positions by using the 45degree bend on the actuator arm , mine sits lower on the turbo, an closer to the compressor housing,

 

[dac69er]

mine is pretty much the same setup as above, but a painted mine after welding so it looks more stock like