Hey guys my ProSport Wideband just turned up seems pretty straight forward to fit although I need to ask which colour wires go where as I cant remember.
The POWER loom has the following colour wires:
Red is obviously 12v live
Black is ground
Orange- Ignition live????
White- Illumination?????
There is also another plug which goes into the control unit with a green, brown and black wire. According to the poor instructions:
Black is ground
Brown is Wideband analog output 0v-5v
Green is Narrow band analog output 0v-1v
Do I need to wire in the narrowband wire? And what pins do these go on the ECU?
Also when calibrating it does the car need to be upto temperature and running?
Thanks Lewis
The POWER loom has the following colour wires:
Red is obviously 12v live
Black is ground
Orange- Ignition live????
White- Illumination?????
There is also another plug which goes into the control unit with a green, brown and black wire. According to the poor instructions:
Black is ground
Brown is Wideband analog output 0v-5v
Green is Narrow band analog output 0v-1v
Do I need to wire in the narrowband wire? And what pins do these go on the ECU?
Also when calibrating it does the car need to be upto temperature and running?
Thanks Lewis