wiring up an Air/Fuel gauge?

J

james1485

Member +
These are the instructions i was told.......

1 Connect RED and WHITE wires from gauge to vehicle ignition

2 Connect BLACK wire from gauge to Battery (-)

3 Connect GREEN wire (AF signal) from gauge to either :

ECU pin which has the AF signal or to the Lambda sensor

narrowband wire (0 - 1V)


Where is the ECU pin which has the AF signal or what way does it connect to the lambda sensor?
 
glanzanut

glanzanut

Lifer
just fitted mine mate if u look at the lambda sensor it only has one wire coming off it cut that and just join again with a bit of chocolate block with the sensor wire for the gauge also in the chocolate block. also i used the permanent and ignition live for the sterio its quick neat and easy that way. hope that helps
 
You must log in or register to reply here.
Top