I have changed my radiator,radiator fan,head gasket,head bolts,removed thermostat,but car is still overheating under boost only...car doesnt overheat all day if i drive normally.
When i bought the engine,i rebuilt it using new piston rings,new valve seal,new headgasket.
One of my piston was bit cracked so i changed all my pistons using 5efe pistons
I polished top of the 5efe piston and installed them,the piston looks same as 4efte piston now.
Compression is good enough,getting 10bar-12bar in all of the cyclinder.
Now need help for the overheating issue.
When i bought the engine,i rebuilt it using new piston rings,new valve seal,new headgasket.
One of my piston was bit cracked so i changed all my pistons using 5efe pistons
I polished top of the 5efe piston and installed them,the piston looks same as 4efte piston now.
Compression is good enough,getting 10bar-12bar in all of the cyclinder.
Now need help for the overheating issue.