gorganl2000's latest activity

I've posted this before regarding the crankshafts. I wouldn't worry too much which one you have to hand. As far as I can tell its a...

many members/people have turboed the 4efe/5efe to varying power levels over the years...as far as i can remember, the crank was not the...

off the top of my head, my initial thoughts are piston ring clearances may be a bit on the wide side to accommodate higher boost levels...

Sorted now lads.

if i remember correctly, the front/timing side crank and cam seals are the same size on the 4e/5e; however some sources seem to indicate...

hail sir long time, hope all is well on your end and you can find some clues as to the whereabouts of your old car

Mint 210bhp Toms kitted ep82 td05 6speed £4700 For sale: My toms kitted ep82 running a td05h 16g producing 210bhp with the corolla g6 6...

Managed to get hold of one locally.

did you see Mr. Bean around? :D

i've always stuck with the OEM headgaskets...they seem to be of decent quality and do the job.

I've never had any issues with bog standard rtv sealant. Just make sure you apply it on clean, oil free surface and don't put too much...

Check out these videos, will give you an idea: FF to 23mins FF to 4mins 25secs I always use the Honda bond sealant .

good stuff

thought id post this on here, i upload after trackdays in my cars https://www.youtube.com/@goldenvtr/videos plenty more on my channel

in the past we used gray sealant on engine builds---any of the reputable high quality brands should work gray because it looks oem and...