Recent content by niv18

RIP Dave, he was a unichip dealer like me and I've always appreciate his work done, my sincere thoughts to his family :(

Ignition wiring Is it the distributer type ignition that we have to use? Hi guys anybody can tell me which wire to connect for ignition from the 4efte ecu to the emu. Cheers

yeah, it's a company in taiwan which has rebuild the turbo.

Hi guys any comments on the TD04H 15g? power etc..

Hi guys, I'm searching for a turbo kit to buy, the turbo must give me full boost at around 3300-3500rpm and hold the boost till the redline. I'm expecting a turbo which can deliver around 250hp. Please pm me if anybody has the kit(turbo, manifold, downpipe, maybe screamer pipe) Cheers, Niv

Yes, but to spend money to do the pipping, i think its not worth what u think

Hi guys, want so info from ya. Everybody say that if your air filter is well located and getting fresh air is better. Now you have an air filter getting rather hot air, does not both goes through the FMIC then to the long pipping near the engine to the throttle body. Whats the difference between...

Cool, thanks mate so i can save around 100pound :)

Guys anyone can explain me the real advantage of using bigger injectors. I'm running with IHI VF24 turbo, Emanage ultimate, HKS EVC boost controller and normal injectors. How can bigger injectors help me in search of power

Hi guys, I would like to know who have used this bolt on turbo on ur 4efte engine, I would like to have some comments and also about the boost with normal engine without forgies. Also if anybody know how the boost goes on 1st gear to 5gear( how many bars)

Hi Guys, wanted to get some info with u, here with have fuel with grade RON92 I would like to know if we can mix Jet A1 to it. If yes please give the ratio. Thanks Niven

Hi guys, I'm having a problem with my boost. When my boost is set to 0.6 bar, on 3rd gear at around 4500 to 5000rpm the boost starts to fall. The same prob when trying 1bar. Before I didnt got this prob the boost was up to 7000rpm. I have checked nearly everywhere but I cant see any leak. Please...

thanx mate, I dont have to change nothing more? my mechanic has just put it to 10 degrees. But when the engine is cold, it makes plenty of misfiring, but when hot, then the car comes normal

Hi guys, does anybody know the timming advance for the distributor? someone messed up with the distributor on my car, and now the car is not running the same. please give me your advice.

Hi guys, Last time my mechanic messed up with my NGK iridium spark plugs, I'm sure he changed the gap without knowing. Anybody can give me the gap size for NGK Iridium grade 7? Cheers, Niven