Search results

Ok so checked all the wiring and turns out im been a retard, it not code 14 i read the flash code instructions completely wrong. there are multiple codes which are 42... 22... 43...45...2 now the instructions say it starts with the lowest code and works up which confused me as there is a 22 in...

So check wiring and connections, do a continuity test on the pin outs? It is a second hand distributor and second hand coil just didn't want to throw money at it if it won't cure it, but thanks il try that tomorrow and let you know the result :)

Last year I bought a sr and did an engine, loom, clocks etc transplant... Have never had it on the road as I lost interest now I need to finish it! When you accelerate at about 2.5k the engine light comes on and limits the power! Now if you keep your foot down it will reach 12psi then hit fuel...

In desperate need of an engine loom for my 4efe to finish the Conversion to 4efte!! :( help a brother out...alternatively ring or text on 07813557477 as not on here all that often

Ok so I'll get the coil and distributor, just the problem with a jumper is then I'll need 82 loom and 91 loom for the ecu plug? I'll continue trying to work out the na loom conversion if all else fails I'll do that. Do you know if the part of the harness that goes into the car (not ecu one) has...

Yeah 97 ep91 with ep82 ecu as the plugs are the same on the na loom, then was told to add in plugs for knock, ignitor and distibutor, intake manifold sensors. Made a start on the loom conversion tonight... What is a jumper harness??

The problem was getting hold of a glanza loom and an ecu for the right price... I paid 30 for the 82 ecu and have read that its not that hard as I am a mechanic myself. Do I need the distributor off the turbo model or would the na one work?

Right I bought a starlet 4efe with full glanza kit, had a turbo'd 4efe engine with fte injectors,fpr, td04l and half a piston missing on cyl 4... Soo I bought a fte block, fte pistons, fte crank and head.. Rebuilt it with new rings bearings headgasket etc, sourced a fte intake manifold and tb...

In need of a pair of size 2 pistons for ep91... With or without rods not bothered, willing to buy a set if someone is not willing to split aslong as they are resonably priced. Also need knock sensor, and the two sensors on the intake manifold.. Map? Tps and throttle body. The situation is, I...

Do you still have the block for sale? Do you know how many/if any pistons are damaged? Also under the oil filter housing in the picture it looks like there is a hole in the block? What is your best price posted to scunthorpe DN20 0EG

I second that... Long shot with it been so long since this was listed. I need pistons and rods, only need 2 but just seeing if you still have them?

white on white :)

fmic still for sale buddy?

if im completely honest i have no idea about harness...the only bit ive looked at is the bit that flashes beeps and stress's me out haha

maybe not the place to post this but its technically not for sale... ive got a HKS turbo timer and was wondering what theyre worth? if its worth taking out il get rid, just honestly it gets on my tits bleeping so i never use it :haha:

ahh right seems worth doing for that price then :) ohh thought they had OBD port on these. so a rough guess-timate on bhp?

ahh i see... pricey aswell i imagine, and i havent a clue what it was setup to boost, as i say when i got it it was around 7ish but i turned it up :/ its faster now by doing so hence why i left it? do they have a code reader port or is it too old? will have EOBD i could just check it with my...

whats a wideband? been meaning to ask this.... the fpr has been turned up so wouldnt that compensate?

the bearings are greased from factory and also sealed on the front i believe... rears can be re-packed with grease if rough, and nipped slightly for play. front (could be wrong) are replace only. and the hub nut will have torque settings but would say you will struggle to damage anything with a...

it was at 7psi but ive turned it upto 12psi? someone told me its not 12 its 0.12? all i know is higher is faster haha