Advice needed

[JordanTD04]

I have issues finding replacement rotors for my wilwood caliper kit! 3g don't make them anymore!
Has anyone got a wilwood 4pot caliper kit that used the 285mm 2 piece discs and recently replaced the rotors! If so what company did you use and what rotors, or did you have to change the discs totally!
Any advice would be great

 

[*starlet_babe*]

Have you tried this number have no idea if it still works but worth a try? 01255 880031

 

[JordanTD04]

I went on the website and left an email but no reply! Al give that number a bash tomorow thanks hopefully some one has the same kit lol!

 

[Mikey B]

If you can find out the PCD of the bolt holes on the rotors, and double check the actual size (thickness ect) then phone up either below

http://www.bigbrakes4u.co.uk/

Altho below they do not show a 285mm rotor but you can machine down a larger one to 285mm if needed Ps rally design sell pads aswell as servicing items for the callipers.

http://www.rallydesign.co.uk/index.php?cPath=562_1214

 

[JordanTD04]

Probably a silly question but what's pcd?

Thanks for the advice al get them off at the weekend and measure up

 

[Mikey B]

Pitch circle diameter, Take stud patterns for example, starlets have 4 studs on a 100mm PCD.

If you put a diameter on centre lines of all the studs it will be 100mm diameter.

Heres an example

http://uk-trailer-parts.co.uk/working-out-pitch-circle-diameters-pcd

 

[JordanTD04]

Okay doke, al give that a bash mate! Cheers