advice needed

[starbophil]

im currently fitting fmic and relocating air filter, the black pipe coming off turbo to induction filter has a hose going into it jus under hot pipe on tmic the hose gos to side of engine. when i relocate the air filter what do i do with this hose?

 

[lildave_ep82]

Are you getting rid of the efi pipe or using it to relocate ? There's 2 holes in the efi pipe 1 big 1 small.

 

[pilgrim_fgau]

If it is the one than runs down the driver side of the engine to the second inlet of the actuator, just block it off. I take it you are still using the stock actuator?

 

[starbophil]

yes iom getting rid of efi pipe and having a 90 degree elbow coming straight of turbo, im changing actuater mani and decating it.
the pipe comes from driver side of engine and goes into efi pipe.
do i just block this off then?
im doing this to a glanza if it makes any difference

 

[pilgrim_fgau]

Yea just block it off, then when u change the actuator, you wont need it at all, as the original actuator has two inlets, uprated ones, like hks have only one inlet

 

[starbophil]

thanks for the info bud