Air filter relocation?

[chewy1369]

Does anyone know the sizes of the pipes needed to make an air filter relocation kit to fit a ct9, to make it sit behind the grill. I have a quadlight ep82 if that makes a difference?

 

[wamdogep82]

2x 51mm 90 degree bends and some straight piping should do it mate

 

[Paul_JJ]

http://www.toyotagtturbo.com/forums...the-Radiator-WITH-the-AC!&p=982260#post982260

 

[c3dpo]

couple of 90 degree blue samco on ebay for 15 quid i think mate

 

[chewy1369]

Cool thanks guys.
I dont need to take the bumper or anything off to do this do i?

 

[c3dpo]

you got air con?

If so it might be a squeeze or you will have to shave some of the 3 ply silicone.

If you have air con, jack the car up and see if you can get the s bend part on the turbo intake (is it stock turbo). Jubilee the S bend part to the intake of course.

The crinkles dont compress too much around the condensor of the AC so no too restrictive, then just marry the s bend from your old intake pipe into your filter

Cheap mods FTW

You might get away without taking the bumper off mate, but that was easy enough, like 7 bolts of something

 

[chewy1369]

No i dont have air con, i do have a big fmic tho if that makes a difference?
And yes its a standard ct9..

 

[c3dpo]

should be easy job for you then mate, could use s bend, or 2 90 degree samco pipes and a joiner 15 quid on ebay atm i think ;o)

 

[chewy1369]

Cool thanks for the help!

 

[c3dpo]

no worries, get stuck search there are a few threads, or if im online pm me

good luck