anybody know thread size?

[Ady]

i have lost one of the nuts which holds the exhaust pipe system to the downpipe/cat i need to go and get a new nut, but i dont know what thread size i need!

anybody know it off the top of their head?

 

[dac69er]

i would have a guess at 8mm. but depending on what downpipe ypu are using it could be any pitch.

 

[Ady]

its a stock downpipe.

come on, somebody must know this!

 

[dan_ep82]

normal m8 bolt mate with 1.5 mm pitch

 

[Ady]

you are a life saver mate thanks

 

[gorganl2000]

not sure about the pitch thing....but 12mm nut,,,which should be an 8mm tread size...i thought the pitch was 1.25 (fine pitch)....but i guessin here.........so listen to the others

why dont u just take off one of the other nuts and take it with u ??

 

[dan_ep82]

no worries

EDIT: def standard m8 nut u need mate .. would recommend heat resistant locking!

dan

 

[Ady]

not sure about the pitch thing....but 12mm nut,,,which should be an 8mm tread size...i thought the pitch was 1.25 (fine pitch)....but i guessin here.........so listen to the others

why dont u just take off one of the other nuts and take it with u ??

because then i will be driving with just one nut!

 

[gorganl2000]

ok...thought u mean the d/pipe nuts to the turbo

agian not sure...byut i thought the exhuast studs/nuts were 14mm (outter diameter)from memory...which maybe a 10mm tread size....maybe pitch is 1.25mm

ah..best to ask JAY or someone with a parts disc or who knows for sure