belt size for undersize bottom pully???

[customep-82]

does anyone know if you need to get a smaller belt for the alternator/water pump when fitting an undersized bottom pully? if so where can i get one?

or will the standard size still fit?

thanks, tom.

 

[Gee]

Which pulley?

I have an under drive crank pulley and was advised to get size 4PK805.

 

[thomllee1981]

sorry to cut in as i need to know this as well am fitting an undersized crank pulley!

need to know the size of the belts that run off it (alternator and power steering. a/c removed)

cheers!

 

[Gee]

Cant remember power steering size. Do a search on old site, you'll find it.

The 4PK805 is for the alternator belt thou, but thats only for a NST pulley. Belt size may differ depending on where you got it, due to size.

 

[customep-82]

cheers Gee, got the power steering one. where did you get the alternator belt from? just a local motofactors?

cheers, tom.

 

[Gee]

I could not find the right size anywhere, so got an American belt size which the NST site said was the correct one. The size is K040305 which is actually UK size 4PK778. 14mm by 793mm, so hope it fits.

Was told to get 4PK805, which is bigger, so we'll see.

If you find a 4PK805 let me know! I believe it is a common Honda belt size thou.