Bhp?

[carmen]

Hey folks will be getting my car on the dyno on the 20th if all goes well this time what power will be expected from the following bellow.

Rebuilt Head
Rebuilt Gearbox
CRD Stage 2 CT9 Hybrid Running 1.1Bar
330 Injectors
Relocated Airfilter
New Dizzy
New Rotor
New Spark Plugs
New N/A Starlet Rad
8mm HT Leads
FMIC
Walbro Fuel Pump
2.0mm Athena Head Gasket
HKS Exhaust
HKS FCD
De-Cat
Zisco Ram Style Manifold
External WasteGate
Dastek Unichip Q

Im Hoping to Get 190+ But im not sure.

P.S Thank You Mark@CMBAUTOS For building my glanza and all the help and advise you have supplied over the past few months:rockon:

 

[96v]

id say 199.999999999999999

 

[max9650]

i would expect 190+ yes, my car is 166 at the fly, with just a decat, hks exhaust, 0.8 bar boost, FMIC

 

[Rev]

Stock Fuel pressure ?

 

[carmen]

Stock Fuel pressure ?

i knew i forgot somthing running a uprated FPR

 

[Rev]

Should be sweet 191 guessing that is 1.4-1.2 Athena?

 

[carmen]

Should be sweet 191 guessing that is 1.4-1.2 Athena?

I went for 2.0mm

 

[markostarletturbo]

I'd have thought more closer to the 200 mark

 

[socks]

Get your result submitted on the Worlds Biggest, Starlet BHP Leaderboard Buddy... when you get your results

Takes a couple of minutes to do if that!

www.s314kba.co.uk/leaderboard

 

[carmen]

Car Made 183BHP and 167 Torque and 153 on the fly a bit lower than what i thought but i am happy with the car and all the work thats been put into it this year

 

[Rory]

Where did you get mapped? Wallace or Performance HQ?

 

[starletburkie]

head gasket is very thick, should have went with a 1.2mm or 1.4mm, when you getting full boost?

 

[carmen]

Where did you get mapped? Wallace or Performance HQ?

Got it done at Wallace

 

[H_D]

Car Made 183BHP and 167 Torque and 153 on the fly a bit lower than what i thought but i am happy with the car and all the work thats been put into it this year

What sort of boost are you running as i made 196bhp @ 1.4 bar on my ct9

 

[carmen]

What sort of boost are you running as i made 196bhp @ 1.4 bar on my ct9

I'm just running a bar as I'm using the car daily and still has a standard clutch but going to get a new clutch lightened flywheel and a quick shift at some point but I have another car which I'm wanting to put ITBs into so that will be done first