Changed my clutch but I cant select gear

[squeekyduck]

I changed my clutch to a CAP clutch and put it all back together but I cant select gear. Before I go and open her up again I want to list the possible reasons.

When you push down on the clutch the slave cylinder moves over so it looks like she is bleed correctly.

 

[Murray]

Is the gearstick stiff? If it is slacken off the selector cables on the box.
They should be able to swivel freely on the selector.

 

[squeekyduck]

Gearstick feels fine mate. I will have a look at the selector cables though mate. When you say swivel freely, what do you mean?

 

[Sheldon]

with the engine off gears go in? i got a cap clutch myself and its fine. but i once was reading someone had problems.

 

[squeekyduck]

Had a look at the selector cables. They both are ok. They are not loose or stiff. They are still selecting gear.

Problem seems more with the slowing of the flywheel than gear selection. Its like its not bleed when it is. I am going to re bleed it and see what happens.