cylinder block

S

skevosEP91

Member +
hello guys !!!
Just looking for a little info....
Does anyone know surely if there are any differences between a 4EFE n/a cylinder block and a 4EFTE turbo cylinder block???
Because i 've cracked a 4efte cylnder and just wondering if i can use a n/a engine's cylinder block....:confused:
 
5e colin

5e colin

Member +
there almost identical difrence is the oil feed for turbo

go ahead and use the 4efe block just get a t piece for oil pressure sensor and a custom feed line to the turbo/ simple
 
A

AdamB

Member +
As above, they are pretty much identical. You'll need to swap some bits over from the turbo motor though.

Thermostat housing
Oil filter housing (your choice if you decide to drill and tap the extra 2 holes)
Tap the knock sensor (the boss is already there just needs putting a thread in)
Swap sumps as the FTE has the oil return, you'll likely have to swap oil pick ups as well.
 
S

skevosEP91

Member +
thanks a lot guys!! You helped me a lot!!!
about the cracked cylinder i dont have photos because we didnt strip the engine yet so be patient and will upload in a few days :)
 
You must log in or register to reply here.
Top