EP82 Mines Ecu

K

keep-it-flat

Member +
For sale: EP82 Mines Ecu. manual transmission 4efte.

Item Condition: good.

Price and price conditions: £550 + fees + postage.

Extra Info: very rare piece of kit. good gains. very aggressive maps.
raises rev limiter
removes fuel cut
removes speed limiter (200km/hr)

Pictures:
P1020305_zps5546c020.jpg


P1020307_zpse9d89f98.jpg


P1020308_zps9df7f896.jpg


P1020309_zps107fbc10.jpg


Contact Details: PM

Location: Ireland

Delivery & Conditions of Delivery: post or collection
 
Texx

Texx

Super Moderator
grimr3ap3r_ said:
Is it possible in anyway to get these p&p ecus to work on an ep91?

Really want a plug and play but can't find one :(
Click to expand...

If you swapped some pins around in the ECU connectors you could probably get it to work with a manual EP91, or if you could get hold of a couple of ECU connectors with pigtails and an old 3 plug ECU you could make up an adapter harness.
 
R

russyb

Member +
Texx said:
If you swapped some pins around in the ECU connectors you could probably get it to work with a manual EP91, or if you could get hold of a couple of ECU connectors with pigtails and an old 3 plug ECU you could make up an adapter harness.
Click to expand...
i

I would be interested in this ecu if this is possible is there a guide or has it been done before ???
 
Texx

Texx

Super Moderator
After checking the ECU pinouts and assuming that the above ECU is for a Mk2 or Mk3 EP82 manual it appears it is possible. You could either swap the pins around and utilise the original 26pin and 16pin connectors on the Glanza wire harness, or get a couple of connectors and a 3 plug ECU socket from a breaker.

EP82 26 pin connector > Glanza wire harness connectors:

1 > 26P Pin 1
2 > 26P Pin 15
3 > 16P Pin 4
4 > 16P Pin 5
5 > 16P Pin 3
6 > 26P Pin 22
7 > 26P Pin 3
8 > 26P Pin 5
9 > 26P Pin 17
10 > 16P Pin 6
11 > 26P Pin 2
12 > 26P Pin 12
13 > 26P Pin 26
14 > 26P Pin 10
15 > 26P Pin 11
16 > 16P Pin 9
17 > 16P Pin 10
18 > 16P Pin 11
19 > 16P Pin 12
20 > 26P Pin 18
21 > 26P Pin 4
22 > 16P Pin 9 - Backup sensor ground for E2 (could be left disconnected)
23 > 16P Pin 14
24 > 26P Pin 24
25 > 26P Pin 25
26 > 26P Pin 13


EP82 16 pin connector > Glanza wire harness connectors:

1 > 12P Pin 1
2 > 12P Pin 2
3 > 12P Pin 3
4 > 12P Pin 4
5 > 12P Pin 12
6 > 12P Pin 5
7 > 16P Pin 7
8 > 16P Pin 15
9 > 12P Pin 7
10 > 12P Pin 8
11 > 12P Pin 9
12 > 12P Pin 10
13 > 12P Pin 11
14 > 12P Pin 6
15 > 26P Pin 20
16 > 16P Pin 8


The pin numbers relate to the wire side of the ECU connectors with the ECU facing up.

23plugecu_zps6a62e33b.png
 
You must log in or register to reply here.
Top