EP91 non turbo - polyurethane bushings wanted

[irishtwincam]

Hello,

The obvious question here is has anyone successfully fitted EP91 turbo poly bushes to a non ep91 turbo suspension component.

Actual experience here please.

Thanks in advance.

 

[5e colin]

wich bush u on about the wishbones are the same , engine to , the rear i never fitted them !!!!

 

[EP91_Chris]

Are the gearbox mounts not different? As there is different options for a LSD box.

 

[irishtwincam]

Im looking to polybush the whole car, suspension is a bit tired.
I suspected the lower arms were same based on some builds Id read where parts were compared.
I also suspect the rear trailing arm bushes will be compatible.

But I would like to hear from someone with experience, or who has compared measurements with pics etc.

 

[5e colin]

like i said the front fit the rear u will have to wait for a reply

@ chris the non lsd mount in turbo and na is the same !!!

 

[irishtwincam]

Thanks for confirming Colin.

Anyone got info on the rear trailing arm bushes?

 

[irishtwincam]

bump

 

[irishtwincam]

My trailing arm bushes are fooked!
The front drop link bushes are also knackered.

For reference, UK R reg EP91 non turbo has 48.5mm trailing arm bushes and an 8 piece bushed front drop link setup.

Who stocks Powerflex PFR76-409 near Cambridge?
I assume camskills/whiteline 8 piece kit will suit my car?
http://www.camskill.co.uk/m19b0s131...roplink_Kit_-_Toyota_Starlet_EP82_up_to_01_92

 

[irishtwincam]

Big thanks to Temple Tuning for supplying powerflex trailing arm polybush kit and whiteline droplink bushing kit.
Noticable difference.
Replaced two rear shocks at the same time, they were fooked!

+1 rep for Temple Tuning. In stock and delivered on time!

Update: Temple Tuning supplied the bushes, and the creak I heard was actually the exhaust ringing against the tow eye under hard conering (now possible due to the bushings) This has been sorted.

All work carried out by Di-Racing in Cambs. Top stuff.

 

[irishtwincam]

Droplink after

Trailing arm bushings before (ugh, no wonder car was wandering everywhere)

Trailing arm bushings after

Also fitted new shocks as rears were fooked!

Sump before was badly rusted and leaking due to it

Sump after some tlc

Sill before rust repaired. Due to previous owners not taking care of her rust was found on the back of the sills and rear chassis legs

Sill after rust repairs

Chassis leg before rust repair

Chassis leg after rust cut out and a new plate of steel inserted and welded

 

[irishtwincam]

Admins, you can close this thread now
Thanks tgtt.com