You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Evo 3 injectors
- Thread starter keeno
- Start date
Im not an expert but i would have thought they would be a bit overkill for our little starlets.
They would be on a standard set-up but I'm building mine with a td05 16g, going for big power
iirc evo injectors are low impedence,starlets are high impedence...
Thats a no then is it lol
chinesemafia
Member +
the evo injectors would be fine especially for that tdo5. they are low impedence and would work with our engine the even though our cars are high inpedence .it the other way round that blows things up i.e. using the high impededce in a car designed for low impedence . the only issue ever reported from using low impedence injectors on our cars would be that the idle is normally on the rich side that can be solved simply by installing a resister pack .like you have indicated you are breaking an evo 3 which also has the resister pack that you can use. this pack would not only solve the idle issue but also make the injectors better compatible with our cars as it will allow them to get the correct resistance . so look at it this way
you can run the low impedence injectors as they cost = 0
you can run them with the resister pack which u already have cost =0
you can by Sard 550cc cost = bout 350
you do the math
you can run the low impedence injectors as they cost = 0
you can run them with the resister pack which u already have cost =0
you can by Sard 550cc cost = bout 350
you do the math
the evo injectors would be fine especially for that tdo5. they are low impedence and would work with our engine the even though our cars are high inpedence .it the other way round that blows things up i.e. using the high impededce in a car designed for low impedence . the only issue ever reported from using low impedence injectors on our cars would be that the idle is normally on the rich side that can be solved simply by installing a resister pack .like you have indicated you are breaking an evo 3 which also has the resister pack that you can use. this pack would not only solve the idle issue but also make the injectors better compatible with our cars as it will allow them to get the correct resistance . so look at it this way
you can run the low impedence injectors as they cost = 0
you can run them with the resister pack which u already have cost =0
you can by Sard 550cc cost = bout 350
you do the math
Cheers Chinesemafia,
Have you any idea if the dimensions of the injectors are the same i.e. will they fit the fuel rail and be long enough to seat properly, just dont want to put them on and encounter problems because of them.
Sorry about all the questions just want to be sure
chinesemafia
Member +
The will fit fine in the rail you would need the evo plugs or u can mod the starlet plugs to fit