forge engine and tdo5 turbo questions,

gglavin

Member +
Thanks.. what about injectors?

go with 550's mate, better spray pattern , will be perfect, get powerflex engine mounts

i went fully forged 5e
hybrid tdo4 turbo kit
e-manage ultimate
apexi avcr
sard 550's
walbro fuel pump 255
fse regulator & gauge
powerflex engine & gearbox mounts
ats 1.5way LSD and bearings ****new
 
Last edited:

jayc-glanza17

Fresh Recruit
if u r going td05 then i would advise paddle.
its a pain daily drive wise, but will handle the power u will throw at it.
suspension and brakes will need uprating mate at that power.
i got uprated discs and yellowstuff pads, and on td04 they r really good,
when hot there is next to no fade.
but willwoods 4 pots would be advised by most, but this could be overkill,
depends on what u do with car.
asw i said earlier u know what the car will do, and what u want it to do.

yes warlbro 255 pump is the one to get, works a treat, there is a lil whine but nothing silly.
550 injectors, ngk sparks heat range 7 is a common one
hope it helps mate.
 

toyotagt

Member +
if u r going td05 then i would advise paddle.
its a pain daily drive wise, but will handle the power u will throw at it.
suspension and brakes will need uprating mate at that power.
i got uprated discs and yellowstuff pads, and on td04 they r really good,
when hot there is next to no fade.
but willwoods 4 pots would be advised by most, but this could be overkill,
depends on what u do with car.
asw i said earlier u know what the car will do, and what u want it to do.

yes warlbro 255 pump is the one to get, works a treat, there is a lil whine but nothing silly.
550 injectors, ngk sparks heat range 7 is a common one
hope it helps mate.

it does thanks
 

kevin ae80

Fresh Recruit
Hey gglavin, im kevin from trinidad ive got two turbos in my possesion and wanted to know which would be better to use on my 4e-fte engine the: ct-12 or ct-20a turbo
 
Top