Glanza not starting

GlanzaGeek

Member +
Hi all,
Ive been working on my glanza project for a bit now, its on my drive and was running. The other day I was trying to get it on a pair of ramps and it cut out. I thought it ran out of fuel so I went to get some to put in, and just cranked. I thought because its on a slope maybe the pump wasn't getting fuel from the tank, so I put another 5 litres of fuel in but still nothing.
Ive removed the plugs cleaned them and tested, and they are sparking.
The fuel pump is working.
And the rail gets pressured.

But I checked the feeds on the injector, and one side is getting its ignition feed, but when cranking the ECU is sending a live too, shouldn't it be sending an earth?

Ive even tried easy start in the intake and sometimes it will do a little splutter but never ignite.

Racking my brains here, any help is appreciated!
 

GlanzaGeek

Member +
Tried it today and was the same. Checked the spark plugs again, and this time with someone to crank it saw only one was sparking. Swapped the plugs out and it cranked up straight away!
 
Top