how to modify 4e flywheel for 5e

[5p1ff]

Hi, has anyone modified a 4e flywheel to fit a 5e setup. having problems getting one locally. any links will be appreciated. And has any one done it before successfully.

Thanx

 

[lleey2k4]

http://www.tm-developments.com/index.php?main_page=product_info&cPath=31_32_15&products_id=390

There you go mate already done.

 

[Johnny_C]

Hi, has anyone modified a 4e flywheel to fit a 5e setup. having problems getting one locally. any links will be appreciated. And has any one done it before successfully.

Thanx

pm'd.ive one here.

 

[_GAZ_EP85_]

Get onto aasco and get a custom 5e flywheel thy lets you use the 4e clutchs like I have, like 240 quid

 

[D3N0]

i can vouch for this flywheel as its whats strapped to my car.

Get onto aasco and get a custom 5e flywheel thy lets you use the 4e clutchs like I have, like 240 quid

 

[5p1ff]

thanx for the info guys . rep for all of yah

 

[5p1ff]

on another note if it was faster would the guys at engineering be able to modify the flywheel. Getting stuff from oversees is difficult from Africa. . What other model toyota gearbox flywheels would be compatible with the 5e.

 

[Harvey]

Can you not get 5e fly from toyota??

I thnk in South afica you had a corolla turbo with the 1.5 12v engine which is a 3E-TE its basically a 12v older version of the 5EFE. The fly fits but also takes the bigger 212mm clutch of the starlet turbo

 

[finx]

correct 3et flywheel bolts to the 5e and uses the same larger clutch surface area and fitment as the 4efte.

 

[5p1ff]

Thanx guys wil look for that one lol

 

[riko666]

Get onto aasco and get a custom 5e flywheel thy lets you use the 4e clutchs like I have, like 240 quid

That's at the groupbuy price though, Retail is around £290 for the flywheel alone, no postage, no VAT.

But yes, get a stock one, as the Corsa GP Turbo (1987-89 model only) WAS sold in South Africa so should be readily available, as it is readily available here in the UK as well via Toyota

 

[chinesemafia]

ive done the modification to a 4e fly wheel with no troubles at all
i just uses the thin thingy that bolts to the crank on a auto 5e to get the correct bolt parten and spacing fabricated a piece the would go through bothe wheels at the same time fitted verry tight to hold them in place. then drilled the holes in a drill press . so the 5e holes are exactly in the centre on the space between the 4e holes. my fly wheel can now be used on either

 

[5p1ff]

Thanx Chinesemafia. That gives me a better idea. :beer:

 

[chinesemafia]

Thanx Chinesemafia. That gives me a better idea. :beer:

no problem bro