Lower Arm Polybushes

[p_a_green29]

Im going to get one of the toytuning antilift kits - which gives me 1 of the bushes.

Ive got this link :

http://www.priracing.com/product.ph...rol-arm-lower---inner-front-bushes--34mm-dia-

These my best (and cheapest lol) option? Also if cash runs out and I cant get a new front ARB anyone sell polybushes for where the droplink goes in?

 

[Gryzor]

get these ones mate... http://www.priracing.com/product.php/2589/0/toyota---control-arm-lower---inner-front-bushes--31mm-dia-

 

[Gryzor]

Im going to get one of the toytuning antilift kits - which gives me 1 of the bushes.

Ive got this link :

http://www.priracing.com/product.ph...rol-arm-lower---inner-front-bushes--34mm-dia-

These my best (and cheapest lol) option? Also if cash runs out and I cant get a new front ARB anyone sell polybushes for where the droplink goes in?

toyota and trd do drop link bushing but I'd try and get the Whiteline drop link poly bushings ...

 

[p_a_green29]

Cheers - are they always the 31mm on the Glanzas?

 

[Gryzor]

Cheers - are they always the 31mm on the Glanzas?

So far ... going by http://www.toyodiy.com which in some cases can be shite...

ep91(EP91-AGMQY) ,1996,1998

48068 ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 RH
48068‑10100 EP95; EP91, NP90..(4FC, 5F)..(GLZS, GLZV, RFL) 1 $211.04
48068‑10120 EP95, NP90; EP91..GLZS, GLZV, REMIX 1 $210.97

48069 ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH
48069‑10080 EP95; EP91, NP90..(4FC, 5F)..(GLZS, GLZV, RFL) 1 $211.04
48069‑10100 EP95, NP90; EP91..GLZS, GLZV, REMIX 1 $210.97



EP82 1991,92,93,94,95

48068 ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 RH
48068‑10090 EP82..GT 1
48068‑16060 EP8*..(5F, 4FC)..(SOLL, GT, XLTD) 1 $198.66
48068‑16060 EP85; EP82..CAN, GT, S, GI 1 $198.66

48069 ARM SUB-ASSY, FRONT SUSPENSION, LOWER NO.1 LH
48069‑10070 EP82..GT 1
48069‑16060 EP8*..(5F, 4FC)..(SOLL, GT, XLTD) 1 $198.66
48069‑16060 EP85; EP82..CAN, GT, S, GI 1 $198.66


There is a parts difference between the EP91 and EP82 gt but I think this is just down to the way to two plates that make up the lower arm are joined together - there's more of an over lap at the join on the older part. Were the newer lower arm has a kind of 'knuckle' join...The only way to be sure about the part Nos is with a Toyota EPC..and your chassis and model nos..

 

[adam]

so which ones will fit a 95 ep82? cheers

 

[Aidan-G]

so which ones will fit a 95 ep82? cheers

31mm as i found out

there a bitch to get the old ones out!

 

[Misterdan88]

Sorry to bump this thread but only got a quick question and no point starting another thread

My glanza passed its MOT yesterday with no advisorys but he did say there is a small amount of play in the passenger side lower control arm, does this mean i only need to replace the bushes?

Thank youuuuuuuuuuuuuu

 

[WallaceGlanza]

Sorry to bump this thread but only got a quick question and no point starting another thread

My glanza passed its MOT yesterday with no advisorys but he did say there is a small amount of play in the passenger side lower control arm, does this mean i only need to replace the bushes?

Thank youuuuuuuuuuuuuu

Yes, should do the trick fine.

Also it's definately the 31mm bushes that fit the glanza not the 34mm, I've got them on mine and have the packet they came in here; Part No. SPF1905K

 

[Misterdan88]

Yes, should do the trick fine.

Also it's definately the 31mm bushes that fit the glanza not the 34mm, I've got them on mine and have the packet they came in here; Part No. SPF1905K

Wicked, cheers mate

 

[Gryzor]

Sorry to bump this thread but only got a quick question and no point starting another thread

My glanza passed its MOT yesterday with no advisorys but he did say there is a small amount of play in the passenger side lower control arm, does this mean i only need to replace the bushes?

Thank youuuuuuuuuuuuuu

if its just to get through the mot i'd try tighting the front bolt on the wishbone before replacing the bushing
the missing bolt here/...