dark_knight
Member +
i've been thinking of better boost control but i currently only have the OEM actuator as getting HKS or similar locally is a bit of a tall order. because of the weakening actuator spring due to age, i have bent the arm back slightly to give more tension on the WG, and it works great as i'm holding higher boost better than it used to before. i however would like to consider a MBC. i know the stock actuator is the bleed-type actuator -- where charge pressure from the turbo charge side is channeled through the actuator and out via the exhaust nipple on it. so now the question is, will a MBC work ok with the stock 'bleed-type' actuator..?