ok problems with drive shafts please help it wont take 2 mins

M

middler1988

Member +
i have 2 starlet gt turbos

ep82 1994 with a lsd gearbox the cv joints and boots have been distroyed..

ep82 1995 with a standard gearbox and shafts + hubs

i thought simply i could take the shafts from the 1995 and put them staight on my ep82 1994

this clearly was not going to happen..

the shaft at gearbox end from the 1995 the bearing at the end will not fit in the cups of the of the gearbox 1994

can i simply take the cups out the gearbox 19955 and put them in lsd gearbox 1994 then the shafts 1994 will fit into the cups 1995 and i will be a happy chap..

someone please ruin my day and tell me this is not possible :(

thanks :
 
turbo head

turbo head

Munster Area Rep.
it shud be possibe i changed my drives before an i used the same cert clips an day leaked thats the only ting id say is order new clips if ur taking out the cups
 
turbo head

turbo head

Munster Area Rep.
ya the only reason i can tink of that one is smaller than the other is that the smaller drivea r out of a gi starlet or a non turbo i no thats the reason with te glanza v and the glanza s
 
M

middler1988

Member +
hmm my car used to be automatic but its converted to a manual... how do i go about removing the cups? do i need any tools?
 
turbo head

turbo head

Munster Area Rep.
no hubs wood be the same. i used a nail bar or leaver bar an put it in behind the cup an hit it hard it shud pop out no bother
Just watch ya dont get covered in gear oil. ul need to get sum replacement oil before ya go at it 1.8 ltrs
 
M

middler1988

Member +
so can i take the cups out of the 1995 and use them and my shafts in my ep82 with lsd gearbox. its the factory lsd i think in my 1994 thanks :)
 
You must log in or register to reply here.
Top