question about 5e engine

[ep82mick]

i was just woundering is der much work in doing a 5e conversion what is the best internals to use

 

[billybob]

i was just woundering is der much work in doing a 5e conversion what is the best internals to use

bascailly your striping an engine down and rebuilding it or wack two standerd gt gaskets on it and turbo it like some people do on the site

 

[finx]

i would not go as far as saying you need to rebuild the engine mate.
its a bolt in affair if your going from n/a 4e to 5e

if you are turboing the engine depending on the size of the turbo you will need to either drop the compression a bit by either doubble layering the head gasket (this is the half ass way of doing it) or rebuilding the engine with either 4efte stock pistons or getting forged items.

what are you aims for the swap? more info you give the more we will be able to help. i also suggest doing a quick search as the topic has been covered so many times is not funny and there is some really good info out there

 

[billybob]

bascailly your striping an engine if your going down that road lad no sence half arse doing the job

 

[madman]

clicky

 

[ep82mick]

i wanna forge the bottom end and do head work what would b d best pistons and crank to use andwhat would be the best turbo basically i wanna have a starlet for drag racin

 

[billybob]

i wanna forge the bottom end and do head work what would b d best pistons and crank to use andwhat would be the best turbo basically i wanna have a starlet for drag racin

tdo5s run very well on them also depends on what boost you want to run to set your 5e up, wossner are a good piston

 

[ep82mick]

what would be a rough price on parts wud ye say. il b doin all the work myself

 

[billybob]

what would be a rough price on parts wud ye say. il b doin all the work myself

really depends on what your looking to do lad

 

[ep82mick]

alri man what ecu is best to run on it..i had a glanza and a gt advance but never really looked into this sorta stuff

 

[billybob]

alri man what ecu is best to run on it..i had a glanza and a gt advance but never really looked into this sorta stuff

e manage ultimate piggyback ecu or apexi ecu,if you get a 5e best thing to do is to change the pistons for gt ones and put a steel head gasket on ,new bearings front and rear seals new rings stuff like that should see around 270bhp if tuned right mybe more,5efhe one as the rods are much better then the 5efe

 

[ep82mick]

i want to forge the block anyway im on a site here speedvisioncps for a 5e engine performance kit its 1800 dollers

 

[lleey2k4]

http://www.toyotagtturbo.com/forums/member.php?u=73

Hes your main man for bits for a 5e build PM him and he will sort you out

 

[ep82mick]

cheers man