Question ??? need verry help

[Skalabala]

where i can have larger cam or forged cam
headwork and throttle body

for conversion 4age head bolt Arp bolt is not good ?????

300whp is a bit high for arp bolts.
Have a look at this place http://www.raceeng.com/c-379-4efte.aspx

 

[QC.tercel.ep91]

what can i take if arp bolt isnot good ????

http://www.ebay.ca/itm/4efte-Engine...r_Truck_Parts_Accessories&hash=item4a9890f39f

this kit is good or not ???????

do you have trick for me to upragde whp what i can fit on the engine what i can ported

where i can have best cams performance and etc etcetc

 

[Skalabala]

That kit does not have conrods.
Do you have pistons and conrods?
http://speedvisioncps.com/index.php?main_page=index&cPath=41

 

[artmull]

300whp is a bit high for arp bolts.


I have no idea where the above statement comes from. Forged 5E 320WHP @ 24 PSI ARP bolts 9.0:1 CR / forged 4AG @ 30 PSI 406WHP ARP bolts 8.5:1 CR / forged 5E 360WHP @ 28 PSI ARP bolts 9.0:1 CR.

 

[Skalabala]

300whp is a bit high for arp bolts.


I have no idea where the above statement comes from. Forged 5E 320WHP @ 24 PSI ARP bolts 9.0:1 CR / forged 4AG @ 30 PSI 406WHP ARP bolts 8.5:1 CR / forged 5E 360WHP @ 28 PSI ARP bolts 9.0:1 CR.

I ment on standard bolts at 300bhp. Sorry man, no need to get excited?

 

[QC.tercel.ep91]

GT25
GT2554R - 471171-3
GT2560R - 466541-1
GT2560R - 466541-4

GT28
GT2854R - 471171-9
GT2859R - 707160-9
GT2859R - 780371-1
GT2860R - 707160-5
GT2860R - 707160-7
GT2860R - 739548-9
GT2860RS - 739548-1
GT2860RS - 739548-5

what is the brest for my 4 efte


http://www.turbobygarrett.com/turbobygarrett/products/turbochargers.html



quickly reponse no big lag
15 psi annd more boost
what turbo ethe engine can run

 

[QC.tercel.ep91]

hi

i have this but not instal it good or not

http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT28/GT2860RS_739548_1.htm

 

[artmull]

i have this but not instal it good or not

http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT28/GT2860RS_739548_1.htm

This turbo is ok as long as you use the option with part number 430609-230 with the turbine A/R of .64. If you use the first option with the turbine A/R of 0.86 you will have too much lag for the 4EFTE with boost coming in at around 5500 RPM. Therefore you would not have any usable power in the 3500 to 4500 RPM range where you normally drive.

 

[QC.tercel.ep91]

good information

thanks alot sir

I understand better now

but the best ideal for me what is it ?????? to spool fast nice boost strong turbo no much lag for 4 efte
boost low rpm similiar to the ct9 but i would like 300 whp 280 more torque


where i can have forged cam
,more intern forged, and the best parts for 4 efte

i find rod and piston
and i find home made cam

but no good cam for me

 

[artmull]

thanks alot sir

I understand better now

but the best ideal for me what is it ?????? to spool fast nice boost strong turbo no much lag for 4 efte
boost low rpm similiar to the ct9 but i would like 300 whp 280 more torque


where i can have forged cam
,more intern forged, and the best parts for 4 efte

i find rod and piston
and i find home made cam

but no good cam for me

You can send Dave at TM-Developments on this site a private message to find out about cams

 

[Skalabala]

i have this but not instal it good or not

http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT28/GT2860RS_739548_1.htm

Good turbo. But as artmull said get the smaller turbine housing.
As far as I know you won't get a turbo with the same spool up times as CT9 and make 300whp with 4EFTE
Maybe supercharge. http://www.tolken.co.za/twincamforum/viewtopic.php?f=8&t=62158&p=751107&hilit=charger#p751107