Right, I'm in the process of doing my heater matrix swap but I'm having problems with the dash not coming off! Iv taken out the dials, the glovebox, the heater controls/stereo, steering wheel and uncliped the dash from the window but it won't budge! It feels as though there is a bolt or something holding it onto the middle but I can't see anything :s any ideas guys? :s :s
removing glanza dash :s help!!
- Thread starter 96v
- Start date
there wasnt a screw/bolt behind the clock :S was following directions i printed off here that i guessed were for an ep82 cuz my dash is pretty much completely different 
found out it was 2 screws in a ridiculous place that were holding the loom to the dash! all is off now, just to start on getting the matrix box out :s
found out it was 2 screws in a ridiculous place that were holding the loom to the dash! all is off now, just to start on getting the matrix box out :sDean_Doherty_1990
Member +
I know this is old but im having the same problem, the dash is held in there tightly, wer are the two ridiculous screw and how do you unclIip the dash from the window