Standard Boost 0.6 Bar By Pass wanted

[StarbowBoi]

I would like to know what pipes to move for permenant high boost in my glanza as 0.4bar restriction is annoying.

Many thanks

 

[WallaceGlanza]

The search button is your friend and so is the tutorials forum.....

http://www.toyotagtturbo.com/forums/showthread.php?t=2277

 

[MentaLEP91]

use the search mate
anyway locate the hi/lo valve near the abs i think, see it has 2 solinoids, take em out, and connect the longer solinoid to the point the smaller is ( u are now bypassing the hi/lo valve), simply u bridge those to points without the valve

 

[StarbowBoi]

I have already read the tutorial, i assume that the diagram with the coloured green circles is what u mean.

 

[StarletCraigy]

Yes do it as per the green diagram, it's literally a 2 min job, the clips push together no problems and without need for pliers, give the pipes a twist before you try to pull them off as sometimes you just need to 'crack' them a bit as things tend to 'bond' over time.