Valve Seal question, difference?

[gt 4efte]

im rebuilding my engine, go forged
doing my cilinderhead now, but got a problem,
i will put new valve seals on it, (got toyota's own complete engine overhaul gasked kit,) but there is a difference between intake seal and exhaust seal?

i dont got this , but a complete engine gasked kit, 04111-11102 4EFTE..EP82 <

c 13711A SEAL OR RING, O (FOR VALVE STEM OIL)
90913-02086 4E*..EP8*; INTAKE SIDE 8 $5.68
90913-02088 4E*..EP8*; EXHAUST SIDE 8 $5.68

so the problem is how can i see whats the right seal for the right place?

i realy wanna put the valve's back i hope u guy's can help me

stefan

 

[Decep82]

it usually says on the bag which is which

 

[gt 4efte]

look, i got this kit:

8 seals in one bag, and 8 other seals in the other bag,

and there is not standing wich is wich,

Please help me guys, i can't put the valve's in now. before i know wich is wich,

stefan

 

[gt 4efte]

any one?

 

[350ep70gr]

Are they like red/brown and black? If so then brown to intake side and black the exhaust side.
To be honest i know engines running the other way around and no problem after many years but for mind proposes do it as i stated first.

Chris

 

[gt 4efte]

yea they are red brown and black, i can't find on the bag wich is wich,

so brown intake and black exhaust. thanks.!! were u found this information?
and what will be the difference? between the colours, cuz they are the same sise.

stefan

 

[350ep70gr]

yea they are red brown and black, i can't find on the bag wich is wich,

so brown intake and black exhaust. thanks.!! were u found this information?
and what will be the difference? between the colours, cuz they are the same sise.

stefan

LoL This is easy.. You just guess ... simple as this..dont forget it is your engine not mine...LOL

Just jocking mate.. wait.. hopefully i will find some proofs on this for you..give me few sec to see if it is stated at the manual..
The black should be more viton heat resistand material.

Chris

 

[350ep70gr]

copyed from manual


CAUTION: Intake valve stem oil seal is Brown, and exhaust valve stem
oil seal is Black. Ensure valve stem oil seal is installed
in proper location.
Valve Stem Oil Seals
Intake valve stem oil seal is Brown, and exhaust valve stem
oil seal is Black. Lubricate valve stem oil seal with engine oil.
Install valve stem oil seal using suitable diameter socket.

Chris

 

[gt 4efte]

Thanks Chris!,

i really apriciate it, youre the man!! i can build my headwork now

Thanks agian!!

stefan

 

[350ep70gr]

Thanks Chris!,

i really apriciate it, youre the man!! i can build my headwork now

Thanks agian!!

stefan

NO NO NO dont build it.... you must port and polish the damn thing first mate..

Chris

 

[gt 4efte]

mmm, i was thinking to hold the headwork as standard, its also special sandblasted and cleaned, so the headwork is fine,
But what do i need to port and polish then? intake side? polish?
and exhaust side, make bigger?
i don't know were i need to begin mate,
im going full forged, waiting on the ordered parts of dave, like weisco,scat rods, td04 turbo kit, etc

stefan

 

[350ep70gr]

mmm, i was thinking to hold the headwork as standard, its also special sandblasted and cleaned, so the headwork is fine,
But what do i need to port and polish then? intake side? polish?
and exhaust side, make bigger?
i don't know were i need to begin mate,
im going full forged, waiting on the ordered parts of dave, like weisco,scat rods, td04 turbo kit, etc

stefan

If you going the forge route DONT DONT DONT miss this step with the head work.Let me find a guide for you...you know..may need 4-5 sec...

http://www.toyotagtturbo.com/forums/showthread.php?p=434935#post434935

Chris