what sort of power would i be looking at?

[ep82_advance]

hi every one i would like to know what sort of power figures i would be looking at with the following mods...

* ct9b with ported waste gate and meshed turbo
* hdi frount mount intercooler
* fuel pressure regulator set at 50 psi
* after market manifold and downpipe
* 1bar of boost with hks fcd

this is the setup at the moment and what power figures would i be looking at with out a map and with a map with dastek unichip ?

thanks in advance people

 

[Stulet-GTT]

psi on ya fpr is rather high, its normally about 35ish have you changed injector's????

 

[ep82_advance]

no mate its standard injectors...

i have just fitted it the other day mate so i dont know what to set it on... do you reckon i should turn it down?

 

[Stulet-GTT]

do you reckon i should turn it down?

YES....

Dont quote me but im sure i have red it somewhere that there only set to about 30-35psi, someone will be along to comferme(sp) this for you...

 

[ralphy]

Yessss correct about that !! U are pushing those injectors to limit