where to get replacement discs for the dave burwash wilwood big brake kit..?

T

turboloon

Member +
as above folks my discs are coming to the end of their life so need to source replacements,they are 280mm iirc,and were sold by Dave Burwash,i belive the discs were 3g...so if any one knows where i can get these.. please let me know ..cheers Jason.
 
steo800

steo800

Member +
Maybe contact 3G directly, from what I remember the first kits were put together by them so they should know what disc they used.

Mid 2007 the first kits were sold. 285 mm disc I thought but open to correction
 
WallaceGlanza

WallaceGlanza

Member +
3G were crap when I contacted them and the discs aren't cheap! The very first kits were either 288mm or 300mm if you had the larger ones, the kits later changed to 285mm which I don't think were 3G.

If you measure the pcd of the bell mounting holes you may be able to find another supplier for the discs too.
 
T

turboloon

Member +
WallaceGlanza said:
3G were crap when I contacted them and the discs aren't cheap! The very first kits were either 288mm or 300mm if you had the larger ones, the kits later changed to 285mm which I don't think were 3G.

If you measure the pcd of the bell mounting holes you may be able to find another supplier for the discs too.
Click to expand...

do you mean the holes that the disc attaches to the bell or the holes for the whel studs..?don't suppose you have the cpntact details for 3g.../?
 
WallaceGlanza

WallaceGlanza

Member +
The holes for the disc to bell mounting. The website doesn't even seem to exist anymore! If you're lucky you may find discs that fit the bells, otherwise you'll need new bells too and will need to make sure the offset of the new ones match the old.
 
Rory

Rory

Lifer
As i said in my PM, you will get them from somewhere, you will just need to go fishing for them once you know the sizes needed.
Diameter, Thickness and PCD of the mounting holes.
 
Phil

Phil

Super Moderator
Rory said:
As i said in my PM, you will get them from somewhere, you will just need to go fishing for them once you know the sizes needed.
Diameter, Thickness and PCD of the mounting holes.
Click to expand...

Yeah try Hi-spec or rally design places like that.

Or get KERI@WMS to make you a set of discs to suit.

Phil
 
You must log in or register to reply here.
Top