whiteline anti lift kit. URGENT

[mcleod]

Please look!!!!Hi im currently fitting the anti lift kit and have come across the old bushes being a compleete twat and not cooperating. are they stuck onto something metal which needs removing????

 

[Nwimie]

stop hammer time

 

[Aidan-G]

yep they are very ignorant!i used an angle grinder and a hacksaw to get them off!you'l need patience.lol

 

[mcleod]

theres some sort of collar does that come off too??

 

[mcleod]

bump

 

[Aidan-G]

yeah i took them off..

 

[mcleod]

how far away is the ball joint from the disc??? i have the 3g big brake kit on my too

 

[siilversurfer_69]

yep they are a pain to do, not even a air chissel will work, wont take to long with a grinder tho

 

[steo800]

heres how i got the bushes off-

-cut as much rubber off as you can with a blade

-angle grind as much as you can in a straight line down to the a arm part without actually grinding the a arm.there will be a bit left you can get near the a arm end cause the grinder is round

-using something flat and strong, put it down the slit you made with the grinder from the end you could reach with the angle grinder and hit it into the slit with a hammer

you will gradually open it.keep doing bit by bit on each side.you soon be able to rotate the bushing on the a arm.try slid it down a bit so you can get the angle grinder to take the rest off