Hey guys i have the link here as well let me know it this would work. cheers Cristian
C cneculae Member + Jul 3, 2010 #1 Hey guys i have the link here as well let me know it this would work. cheers Cristian
W Wills21 Member + Jul 3, 2010 #2 I think so mate, someone will be along soon enough with a definite answer I'd say.
Rory Lifer Jul 3, 2010 #3 Should be. Single wire universal one does the job on the FTE, vant see any diffirence on the FE
kieran.s gt Member + Jul 3, 2010 #4 4efe sensor is 4 wire so that wont do get a single wire universal one
Fizturbo Member + Jul 3, 2010 #5 As above long as its single wire, And if ur stuck then just order the one below http://cgi.ebay.co.uk/BRAND-NEW-Uni...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318
As above long as its single wire, And if ur stuck then just order the one below http://cgi.ebay.co.uk/BRAND-NEW-Uni...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318
C cneculae Member + Jul 7, 2010 #6 ok thanks for the advice guys i just have one question left. How is the one wire lambda sensor going to work if i have a two wire stock unit. Does anyone have a DIY guide on which wire goes where. THanks
ok thanks for the advice guys i just have one question left. How is the one wire lambda sensor going to work if i have a two wire stock unit. Does anyone have a DIY guide on which wire goes where. THanks