Wiring Tuning Developments Fuel Pump...

[clarkytrd]

Hi Folks,

Got a new fuel pump from Tuning Developments and wanna know which x2 wires do I splice into on the original loom?

Thanks for the help,

John

 

[kieran.s gt]

there is only 2 wires to connect
same as this http://www.toyotagtturbo.com/forums/showthread.php?4339-Walbro-fuel-pump-fitting-guide-*

 

[clarkytrd]

Lovely job Kieran, i know theres only the two but didnt know where to wire them into on the origianl loom.

Thanks mate

 

[Stu-]

When you have the fuel pump hanger out there are only two wires to the pump. Cut these and use these to wire your new pump to. You don't need wire it into the loom itself, just at the pump.

 

[Dan-The-Glanza-Man]

wire them the same wire over wise it wil be working in reverse lol acting as a hoover lol

 

[starletgtturbo1]

wire them the same wire over wise it wil be working in reverse lol acting as a hoover lol

these pumps cant go in reverse

 

[clarkytrd]

Only read thru the link above there now, my bad, I only realised there was the two internal wires on the pump

All good now folks, thanks for the help!!