Zisco CT9 ram users GTFI here

[malcolmgt]

Put mine on at weekend all okay apart from one bolt which I can't tighten much.

Imagine you look at it, you have 4 top bolts and 2 bottom ones.
The bottom left one is under the ram and I can't get a spanner on it. If I do it has no room at all to move. I get a socket on but can't turn it.

Anyone got any advice?

 

[H_D]

You need a swivel spanner or put the mani on by itself then bolt the turbo and downpipe to it.

 

[malcolmgt]

You need a swivel spanner or put the mani on by itself then bolt the turbo and downpipe to it.

swivel spanner?
is that like a rachet spanner which bends at the end?

 

[StarletNutter]

think he means turning the spanner back and forth to get an extra bit off a turn on it

 

[Rev]

I remember trouble with that bolt on the stock manifold it needed a socket spanner that was the bent type to reach the bolt head and bend around the manifold with sufficient clearance for the handle at the same time maybe a similar issue with the ram?

 

[dark_knight]

try put the mani on first then mount the turbine.

 

[aidan]

Just move the power steering pump out of the way and use a spanner