I am providing the gaskets for a friend when he helps adjust my valves, I'm just wondering if I will need other gaskets other then valve cover gasket I will need to replace when removing valve cover, and if I need to buy sealant aswell or is the gasket is good enough ? Thanksif you are removing the head from the engine to adjust valves OR clean them as well, i would suggest a headgasket, strongest one you can get.
spark plug seals, rocker seals as well. there really is not much in the way of complexity in there, seal wise anyway.
yes you will need sealant, Starlet engine's love to leak around the rocker cover Gear Lobe sections on the corner.I am providing the gaskets for a friend when he helps adjust my valves, I'm just wondering if I will need other gaskets other then valve cover gasket I will need to replace when removing valve cover, and if I need to buy sealant aswell or is the gasket is good enough ? Thanks
Thanks man, any sealant you recommend?yes you will need sealant, Starlet engine's love to leak around the rocker cover Gear Lobe sections on the corner.
really any high temp Gasket Sealer will do just make sure it has time to setThanks man, any sealant you recommend?
Thank you cheersreally any high temp Gasket Sealer will do just make sure it has time to seal
Victor Reinz sealant and gaskets.Thanks man, any sealant you recommend?
Thanks for the heads up, i have never adjusted valves before so i did not know about thisOn a side note, do you know that you need to use shims to adjust clearance?
First find out who has stock of the shims before stripping.