Recent content by Vinpetrol

Did you attach a picture to that last post? If you did for some reason I can't see it. I don't suppose you know anyone with a used hub ? Cheers Vin

Would the shock mounting plates pull the wheel off in the head if they were buckled? Do you know if I bought a new hub wether it would have the bearing already pressed in ? Cheers Vin

Morning Jay The ABS is a side issue at the moment as the front of the car isn't lining up. The OSF wheel is leaning out . It's had an impact on that corner. I've replaced the wishbone drop link and track rod ends and took it to a laser alignment place but it's still not right. Vin

Hi all Not posted for a while as gave up on rebuilding osf corner up last year for my sanity but going back at it again shortly. I've replaced most of the parts on it but it won't line up properly and ABS light staying on. I'm thinking I need to change the hub and if this doesn't sort it...

What are the points that can be adjusted in an alignment? Vin

Is this the kind of adjustment I'm looking for? [/URL][/IMG]

The track rod looks straight , you can see it in the first picture. What sort of place has a four wheel laser alignment ramp ? A body shop? Vin

Here's a couple of pics of it in case yous can see something I'm missing ! I did notice that the spring compressed enough on impact to allow the driveshaft to bash the inner wing . You can see it in one of these pics. [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] Vin

Hi jay When you say alignment what actually needs aligned ? Who would do this ? What equipment is required? It's that far out that it is undriveable so I would need to trailer it. Vin

I have it back together at the moment but the wheels are noticeably out of line and the top of the wheel on the corner in question is leaning out. I had intended to just get it tracked but when I put it back together it looked to far out just to be just needing tracked:confused: Vin

Hi Jay The wheel , lower arm , drop link and disc were damaged . The wheel has been repaired and the rest replaced. What else should I check? Vin

There is a wee threaded hole at the back near the bottom where the water is coming out .should this have something in it? Do you think head gasket could be gone if the head is breathing water ? Vin

Could front hub be damaged after curbing car very hard ? Does anyone have any idea where I can get a drivers side front hub for an ep91 with ABS? Aftermarket or used ? Cheers Vin

Working on sons Glanza I noticed a water leak . When I looked closer it seems to be coming from a hole in an aluminum looking tower that has pipes coming from it 2 of which go directly to the rocker cover. Does anyone have any idea is this normal or not ? [/URL][/IMG] This is the part...

I have found the diagnostics box and connected Tc and E1 while the wife was in the car with the ignition on but all that happened was the air bag light flashed constantly. Also pressing the brake pedal 8 times in 3 seconds had no effect. I had a look over the ABS diagnostics thread and it Does...