Search results

as above urgent thanks

Piston will come out easy enough but wont go back in as easy as the other side Has anyone else had this problem? Done the pads yesterday and all the other wheels are clean apart from this one wheel is just black Any help?

i have a loud grinding noise i can hear up to 3k revs which is probably always there but after that i am unable to hear it because of the exhaust it sounds like the gearbox to me but seems to go into gear fine and no crunches any ideas what this could be?

Hi im not sure my car is fueling correctly i have an afr printout could someone have a look to see if it is okay as i dont really understand much of it any help appriciated :) http://s711.photobucket.com/albums/ww111/hughes28/?action=view&current=Photo0040.jpg

after full tdo4 kit or manifold and downpipe thanks

using a hks actuator from a ct9 setup and using it for a td04l if a bracket was made up anyone done this or any pics thanks

been on the rollers today at hayes engineering in erith spent 5 hours trying to get it to boost i have no boost till 5500 which is at 4 psi then at 7500 i have 8-10 psi, when on the rollers watching the actuator the arm does not move, he tested the actuator with a tool pushing air in which does...

anybody have any pics of this mbc fitted to a tdo4 any help appriciated:)

preferably hks thanks

need the mani to turbo gasket and gasket to the de cat pipe best place to get these from? any help appreciated

loads of jap cars about see a few starlets any off here?

fitting a sard fpr just wondering what size fuel hosing people use briefly tried 6mm seemed to hard to get on and just kinked up, would 7 mm be ok for this or are other sizes made thanks:)

wanting a greddy e manage blue full kit just wondering on the best/cheapest place of sale at the moment any help appreciated thanks

will be going td04 soon want some sort of management first been looking at this on ebay...