Search results

Hey guys, recently my car has been jumping on 1st gear. for eg. when the car is stationary and then i engage 1st (driving normaly) the car hops a bit when i lift off my clutch. this has never happend before. so im wondering if it is time for a new clutch? any ideas would be great...

Hey guys, just wondering what signs does the clutch give you when it requires to be changed? Also, ive read many posts about crunching gears but i still dont understand how to fix the problem. For example, when ive recently changed my gear box oil but the same problems still occur: when...

Hey guys, ive recently replaced my radiator. Everything was fine when i turned on the car, the fan was OFF as usual but then I took out the battery to work on something else and when i reconnected it... now the fan is constantly ON. Ive read something about the relay being fualty or bad...

hi guys, I heard that there is a trans cooling system on the radiators for the autos? Would the auto radiator be suitable for a straight swap with a manual radiator? My starlets a manual and the radiators leaking at the bottom very very slowly so i want to replace it. cheers

hey guys, just wondering if installing this would effect the current wheel alignment of the car? or should i really install it and then go for an alignment? my allignment is fine at the moment though. i was told not to install it because if i remove the two main bolts where you add the arm...

hey guys, ive had my car for over 7 years and ive just realised that it tilts a little bit to the right (drivers side). is it because of warn suspensions? i mean since more weight is always on the drivers side because i rarely have passengers. i have apexi springs and kyb shocks. they are...

hey guys, before i connected a fuel cut defender my car gave me a fast spool at first and thats with solanoids bypassed but after i added a fuel cut defender and fuel pressure regulator, it became slow to spool? could it be the voltage setting for my fuel cut defender? because when i was...

Hey guys, just wondering if any of you guys know the difference between custom aluminum piping compared with custom mild steel? Im guessing aluminum would be lighter? but then in terms of reliablity, cooling and strength against pressure I wouldnt have a clue. Thanks

hey guys, it might sound like a silly question but after awhile a lot of dirt and grease builds up around the suspensions so im just wondering if its neccessary to clean them incase it affects their performance? if so how? cheers

Hey guys, just wondering if it would be a good upgrade. also what are the rates for the mr2 glimited (non turbo) injectors and fuel pump anways? and is it possible to upgrade to higher flowing injectors with our stock ecu or do you need at least a piggy back ecu eg. afc? cheers