Search results

hello, how to fit oversized valves on a 4e? seats need to be replaced or i just make them bigger for the oversized valves? can the seat be changed on a 4e? thank you

Hi everybody, I m fitting a zisco intake mani With stock throttle body. I need more clearance anyway is it ok if I block all the pipes of the throttle body, the 2 water hoses and the others for air. I have no air con, no power steering, and now With the New mani no idle valve. Thanks

Hi i have a rear antiroll bar fitted on my ep81 châssis. So the shocks are for the na. now if i fit coilovers will i need to re drill holes for the brackets ? Hope your understand what i mean ;) thanks Also the ajustable Panhard rod should ne installed before the rarb?

Hi members, i have a zisoc ram horn mani with external wastegate for ct9 and the triangular TD04 flange. What sould i do? cut off the square flange and weld on the td04 flange instead or directly stick it to the stock one? thanks

hi evryone, i might be stupid asking you guys this but what means " to notch the block". Apparently, it has to be done when putting new forged rods depending on the manufactuer, am i wrong?? Could you explain brievely what it is ? thanks

hi everyone, i ve been running ct9 over 2 years now and i ll be upgrading to TD04 soon @ 1bar. If i want to use bigger injectors ie 330 cc, where can i get them from? which toyota? and so it means i will need a piggyback? Thanks

hi guys, i have an ep82 and a yaris as well ;) i m looking for a rear muffler like an apexi blitz or whatever something good. SO it is for a 1.5 yaris ts. i guess it s the same for the 1l let me know if you have this, pics are appreciated. thanks

hi guys, my friend just bought a yaris TS ( vitz rs in japan?) N/A 105 bhp, and he d like to put a complete 4EFTE instead. Is it worth it? is it bolt on? and as for the loom? i searched on the net, and did not find good info. Thank you

very communicative and serious... he emailed me a few times to find out if i got my item. i recommend this seller and buy again with him thanks

after tarajperformance (264e), now it is DARREN KELLY. i paypald him 270e for a lite bonnet. apparently this guy is known for stealing people. do you guys know him? please help i found his pseudo here registered in 2011 : i_forget_glanza

hi, as above i need handbrake cables. PM me thanks

hi everyone, i need the bolts that hold the calipers to the hubs. 2 each sides so it is 4 bolts total. please pm me if you have these and i ll paypal. cheers

hi, i m planning to change headgasket soon, and i need the tool to remove the 10 head bolts do u guys have this please for sale? cheers

i paid for a new gi bonnet from jam 35 in november 2012 maybe october. it had to be delivered in france where my friend lives.anyway i dont have my item. he does not reply to pm. he replied me twice and said he had no internet access and he was going to contact the company. thats all...

hi guys i run the car with a ram horn manifold with tial (new) 0.8b spring wastegate and it has never done fuel cut. the boost gauge reads 0.7b max. what does this mean? is it boost leak? tired turbo? is 0.7b instead of 0.8b is an important gap to say there are boost leaks somewhere? thanks

hi, i want to put a new 02 sensor and the part number is 89465-10020 do u know guys if i can use a sensor from another toy? is the 4efe 02 sensoll ok ? the 4efte did not appear where i live so no way to get 4efte part. thanks

hi, as above looking for the connector that goes into the green sensor at the back of the housing, i think its for the rad fan to kick in. Thanks

hi , i ve noticed today the idle stop screw s been missing and the throttle cable is touching anything when the throttle is off do i need to get one quick ? will this affect the car running with no stop screw? i hope u guys understand what i mean . thanks

hi i ve just received a tial wastegate, and i have few questions before installing it. there is a seat valve on the inlet, and if i put the gasket on it, its not sitting flat on the wastegate as the seat valve is a bit higher... is this normal, and do i need to use the seat valve? is the top...

hi, looking for a front strut brace for ep82, the bar that bolts on the shocks. thank you