another way of getting around fuel cut without an FCD?

J

jayc-glanza17

Fresh Recruit
another way of getting around fuel cut without an FCD,
as in the future i hope to be boosting higher,
and just would like to know a way of another way of getting around fuel cut.
cheers jay.
 
Kelly

Kelly

Member +
Fuel cut is there for the safety of your cars engine.

The best way to get around fuel cut if you wanna boost higher is to get a piggyback or stand alone ecu and get it all mapped correctly for your car. Depending on what boost levels you wanna run this may also require some sort of additional mods to aid with the fuelling.
 
J

jayc-glanza17

Fresh Recruit
my car will ceratinly be mapped,
got prices for it of the guy,
checked them out and seem to be good guys.
what is the fuel cut off point?

as my plan is to boost to 12psi,
then get ecu and it mapped to 1 bar.
of course i would get a fuel pump, and fuel pressure regulator,
anything else?
 
M

Mr LCA

Member +
RRFPR, new exhaust manifold and sort the breathing out mate. this should see you ok

ps. id probs get an aftermarket bov to stop compressor surge.
 
J

jayc-glanza17

Fresh Recruit
ive got d-cat, and exhaust. also induction kit
just the manifold and fmic.
also have got an khs actuator waiting to go on,
really i want to run .8bar for the time being,
which should be ok?
when does the fuel cut come in i heard it was around 13psi?
is that correct?
 
Spoonz

Spoonz

Member +
12-13psi but u didnt answer myu question lol u do know the standard ECU isnt remappable has from what u posted it seems like your gonna get the standard 1 remapped
 
durmz

durmz

Member +
Spoonz said:
12-13psi but u didnt answer myu question lol u do know the standard ECU isnt remappable has from what u posted it seems like your gonna get the standard 1 remapped
Click to expand...

i think jay just means fuelling set up with the rrfpr mate, on a wideband rr
 
Spoonz

Spoonz

Member +
no im not on bout there he said he went to a garage about a remap but he dosnt mention an ecu of any sort
 
durmz

durmz

Member +
Spoonz said:
no im not on bout there he said he went to a garage about a remap but he dosnt mention an ecu of any sort
Click to expand...

yer thas what im saying mate, i believe thas what he meant, remap/fuelling setup, asin thought were same thing, i may be wrong, but jay aint stoopid
 
durmz

durmz

Member +
jayc-glanza17 said:
my car will ceratinly be mapped,
got prices for it of the guy,
checked them out and seem to be good guys.
what is the fuel cut off point?

as my plan is to boost to 12psi,
then get ecu and it mapped to 1 bar.
of course i would get a fuel pump, and fuel pressure regulator,
anything else?
Click to expand...

ah, my mistake, he does mention here about getting an ecu
 
J

jayc-glanza17

Fresh Recruit
thanks tom,
thats what i mean by mapping,
i know the standard ecu cant be mapped,
but i only want and intend to run .8bar maybe a bar in future,
so dont intend to get a ecu,
just want the fuelling once get supporting mods done,
to be as good as it can be.
just wondered about fuel cut, becuase i hate, electronics.lol
looks like i have to get fcd if i decide to got to 1bar.
so fuel cut is 12psi-13, then i should be ok,
when setting actuator to .8bar.
 
Spoonz

Spoonz

Member +
durmz said:
yer thas what im saying mate, i believe thas what he meant, remap/fuelling setup, asin thought were same thing, i may be wrong, but jay aint stoopid
Click to expand...

dunno bout that one lool only jkin jay :D just wanted to check that was all no offense or nuttin :D
 
durmz

durmz

Member +
jayc-glanza17 said:
thanks tom,
thats what i mean by mapping,
i know the standard ecu cant be mapped,
but i only want and intend to run .8bar maybe a bar in future,
so dont intend to get a ecu,
just want the fuelling once get supporting mods done,
to be as good as it can be.
just wondered about fuel cut, becuase i hate, electronics.lol
looks like i have to get fcd if i decide to got to 1bar.
so fuel cut is 12psi-13, then i should be ok,
when setting actuator to .8bar.
Click to expand...

no worries like.

hate electronics? friikkin x2!! hate em lol wires fucking wires lol

should be able to pick one up cheap mate, theyre not that much considering everything else u gotta get to run a bar safely :)
 
J

jayc-glanza17

Fresh Recruit
no offence taken, i know cars well, not electronics, or ecu's so
it was a general query, but cheers for the answers tho.
if i was to go above 1.bar lets say hybrid,
then ecu and new injectors certainly would get.
but atm, i want .8 bar, and sure everyone understands about
getting fuelling done best as can be,
as i want my starbo still to be as reliable as it has been.
 
T

tdo4starlet

Guest
you need a piggyback ecu then get it mapped thats the only way too go,,,or just get the good old push bike you wount need a fcd for that
 
You must log in or register to reply here.
Top