dark_knight
Member +
i have an apexi turbo timer that works great. it's wired in correctly and functions as it's meant to. i have it reading the ecu signal thus it gives the narrow-band a/f ratio readings as well. handbrake safety feature is on point too.
problem is, at times, not all the time btw, it will loose the memory presets programmed into it and return to the 30-second default (out-of-the-box state). there is no sequence to these memory losses, they are pretty random. just wondering what would cause this..
it stays energized when cranking so i doubt it's that either. my battery is good too. not a worrisome problem but would like to get it fixed all the same.
ideas..?
problem is, at times, not all the time btw, it will loose the memory presets programmed into it and return to the 30-second default (out-of-the-box state). there is no sequence to these memory losses, they are pretty random. just wondering what would cause this..
it stays energized when cranking so i doubt it's that either. my battery is good too. not a worrisome problem but would like to get it fixed all the same.
ideas..?