rage
Lifer
thought you lot might like this.
currently building a 2e-e engine for my daily driver.
had some worn crank seals so she was leaking vital fluids all over my driveway so i opted to preform a little surgery..
bit just changing the seals would be boring... so i'm giving her a once over and repainting the engine
pics of the progress so far:
the old lump is out...
head dismantled
bottem end dismanteld
have a ultrasonic cleaner, love it!
cleaning the head and valve seats
fitting the valves
all done
more parts..
small torque wrench for small things works very well!
main bearings in and lubed
drop the crank in
fitted the end caps, lubed the bolts and bolt heads so i can torque it propperly
time for the big torque wrench
prepare to assemble
piston rings all back in place and moving freely. was all gummed up before the cleaning
tapping the piston in place
lube it up!
tadaaa
to be continued
currently building a 2e-e engine for my daily driver.
had some worn crank seals so she was leaking vital fluids all over my driveway so i opted to preform a little surgery..
bit just changing the seals would be boring... so i'm giving her a once over and repainting the engine
pics of the progress so far:
the old lump is out...
head dismantled
bottem end dismanteld
have a ultrasonic cleaner, love it!
cleaning the head and valve seats
fitting the valves
all done
more parts..
small torque wrench for small things works very well!
main bearings in and lubed
drop the crank in
fitted the end caps, lubed the bolts and bolt heads so i can torque it propperly
time for the big torque wrench
prepare to assemble
piston rings all back in place and moving freely. was all gummed up before the cleaning
tapping the piston in place
lube it up!
tadaaa
to be continued