Is it possible to use the bigger ct12 compressor wheel with the smaller turbine wheel from the ct9 and the rest of the ct9 components? Basically I just want the CT12 housing and compressor wheel and the rest to be from the ct9. But Ill do what I have to to make it work.
The smaller turbine wheel would give it faster spool and would make it so I would have to get the housing bored.
Just an idea.
Sorry for reviving this.
Also would like to know what ruggiero06 is asking.
And also regarding what RGM1800 built... It looks like the CT12 has a way bigger exducer on the comp wheel but
has a smallish inducer? So if you look at the ratio between inducer and exducer of CT12 comp wheel it is bigger
than most turbos. For example CT9 is 34mm 48mm and CT12 would be something like 34mm 54mm.
So this means that if you use the build of RGM1800 but fit a bigger comp wheel(as it looks like there should be more space)
It would be nice responsive as the CT12 exhaust wheel should flow better and spool a bigger comp wheel better? As it looks more aggressive to me..
Catch what I am saying?